The thesis deals with vibrations caused by geometric defect and fatigue damage of rolling element bearing. Hardware for vibration measurement is tested on 25 new pieces of NJ 304. Second part of the thesis examines if measuring of bearing vibration can help to detect a geometric defect. Geometric defects are detected according to a spectrum of vibration but the results are not absolutely exact. The possibility to detect geometric defects by measuring vibration has not been proven. The end of project tests diagnostic methods for rolling element bearings. The bearing defect was simulated to demonstrate bearing failure frequencies, envelope method and vibration spectrum.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230797 |
Date | January 2013 |
Creators | Otoupalík, Jan |
Contributors | Ripel, Tomáš, Krejsa, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds