TICHÝ Pavel: Production of a holder body by solid forming. A Graduation Thesis of Master´s Studies, the 5th Year of Study, the School-year 2008/2009, FSI VUT Brno, Department of Machining, May 2009, Pages No. 80, Appendixes No. 9. The Graduation Thesis, elaborated in the framework of engineering studies, presents the technology of a body holder production carried out by solid forming. The material of the forged piece is steel Ck55 (12 060), the semi-finished product is of the 65 and its length is 12m. A yearly production is 122 000 pieces. Based on the studies of possible production technologies, the technology of production by die forging has been chosen, while a drop forging technology on a hammer HO630 and product-trim on a trimming press S160 have been used. For this option, the required technological calculations, the design of the die, the specification of production machines, which are necessary for forging process realization, have been carried out. An inspection of the propose forging by a private forge and a change in the geometry of the die have been carried out. A part of the study is a simulation forming process which is made in the software QFORM.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228786 |
| Date | January 2009 |
| Creators | Tichý, Pavel |
| Contributors | Štroner, Marek, Kopřiva, Miloslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds