This thesis is devoted to the numerical and experimental investigation of residual stress and deformation in polycrystalline metallic alloys at different scales. The emphasis in the current study is placed on establishing the connection between the simulation of deformation by the Finite Element (FE) method and experimental characterisation by synchrotron X-Ray Diffraction (XRD). Of particular importance is the interpretation of modelling results and their validation by careful comparison with experimental data. The concept of eigenstrain was used extensively throughout the report to study the residual elastic strain distributions and their sources. A pseudo-thermal strain FE procedure was used systematically to simulate the residual stress states in samples and engineering components of different shape and dimensionality. The case of 1-D strain variation was considered using the example of a plastically bent bar. The direct and inverse problems of eigenstrain analysis were solved, and validated experimentally by the use of XRD and EDM slitting methods. A novel 2-D discrete inverse eigenstrain algorithm was proposed and implemented to reconstruct the residual stress distribution in a worn rail head. The link between the residual stress and deformation history was studied via thermo-mechanical modelling of the Linear Friction Welding (LFW) process. To advance the understanding of polycrystalline deformation behaviour across the scales, a crystal plasticity model was employed to simulate the elastic-plastic deformation behaviour of Ti-6Al-4V alloy. A post-processor was developed to extract the average elastic strains for orientation-specific grain groups and to compare them with XRD data. A “peak constructor” post-processor was developed that utilised the knowledge of both the elastic strain and dislocation density. In a further development step, a strain gradient crystal plasticity formulation was adopted to account for the local dislocation evolution. Intra-granular deformation analysis was carried out and micro-beam Laue experimental diffraction technique was used for validation. Thus, local lattice arrangement was studied at the microscopic, intragranular scale. Special attention was paid to the phenomenon of Laue spot “streaking”, indicative of the local lattice misorientation caused by dislocation activity during deformation. The results presented in this thesis contributed to the fundamental understanding of the residual stress and deformation in polycrystalline metallic alloys and lead to more than 20 publications in peer-reviewed journals and conference proceedings, which are listed in the Appendix.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:526436 |
| Date | January 2010 |
| Creators | Song, Xu |
| Contributors | Korsunsky, Alexander |
| Publisher | University of Oxford |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://ora.ox.ac.uk/objects/uuid:8c33eaef-306a-456e-bfb3-2b2cf470156d |
Page generated in 0.0023 seconds