The attempts at classification of functional faults in VLSI chips have not been very successful in the past. The problem is blown out of proportions because methods used for testing have not evolved at the same pace as the technology. The fault-models proposed for LSI systems are no longer capable of testing VLSI devices efficiently. Thus the stuck-at and short/open fault models are outdated. Despite this fact, these old models are used in the industry with some modifications. Also, these gate-level fault models are very time-consuming and costly to run on the mainframe computers.
In this thesis, a new method is developed for fault modeling at the functional level. This new method called 'Model Perturbation' is shown to be very simple and viable for automation. Some general sets of rules are established for fault selection and insertion. Based on the functional fault model introduced, a method of test vector development is formulated. Finally, the results obtained from functional fault simulation are related to gate level coverage.
The validity and simplicity of using these models for combinational and sequential VLSI circuits is discussed. As an example, the modeling of IBM's AMAC chip, the work on which was done under contract YD 190121, is described. / M.S.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/90932 |
| Date | January 1985 |
| Creators | Gupta, Anil K. |
| Contributors | Electrical Engineering |
| Publisher | Virginia Polytechnic Institute and State University |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | en_US |
| Detected Language | English |
| Type | Thesis, Text |
| Format | viii, 109 leaves, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 12607426 |
Page generated in 0.0016 seconds