The presented diploma thesis deals with the issue of wire electrical discharge machining of SiSiC ceramics. The first part explains the principles of electrical discharge machining, describes the WEDM technology and presents the properties of the advanced ceramics. The second part consists of a detailed analysis of the cutting process of eighteen samples obtained with systematically changing process parameters. Based on the obtained results from EDX analysis, SEM electron microscopy and topography there was performed an analysis of the influence of process parameters on the cutting speed, surface roughness, kerf width and number of wire breaks with usage of the selected brass cutting wire. From the evaluated results it was possible to select a combination of parameters that ensured a stable machining process.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417109 |
| Date | January 2020 |
| Creators | Habovštiaková, Mária |
| Contributors | Mouralová, Kateřina, Osička, Karel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds