<p>The main aim of this PhD dissertation is to investigate the inherent and induced anisotropy in granular materials. The study includes both the experimental and theoretical aspects and provides a methodology for characterizing the mechanical response of granular materials that display anisotropy.</p> <p>The content of this thesis is divided into two main parts. The first part is focused on investigating the mechanical properties of materials with inherent anisotropy. In particular, an experimental program designed to investigate the mechanical properties of Ottawa standard sand (C109), with inherent anisotropy that is generated by the initial densification process, is described. The program involves a series of direct shear as well as triaxial axial tests. Its primary objective is to demonstrate that anisotropy may occur in sands that have nearly spherical particles (i.e. are typically considered as isotropic) provided the distribution of pore space has a preferred orientation due to the initial densification process. Following the experimental part, the mathematical formulation based on the Critical Plane Approach (CPA) is presented for describing anisotropic mechanical behavior of the material. The procedure for identification of parameters embedded in the constitutive model is outlined and an extensive numerical analysis is conducted simulating the experimental tests.</p> <p>The second part of this thesis deals with induced anisotropy and its focus is on developing an evolution law for the fabric of particulate materials as a function of continuing deformation. The microstructure descriptors are based on lineal intercept measurements and include the areal porosity and the mean intercept length distribution. The methodology involves performing a series of Discrete Element simulations for a granular assembly under evolving directions of the principal stress/strain and defining a correlation with the evolution of material axes. It is demonstrated that granular materials with spherical particles may become anisotropic due to the initial compaction process and that the induced anisotropy is characterized by the coaxiality between the microstructure and the total strain tensors. The proposed evolution law is incorporated into the constitutive framework for anisotropic materials, as discussed in the first part, and some numerical simulations are conducted. It is demonstrated that the proposed approach can describe, at least in a qualitative manner, several manifestations of induced anisotropy in granular materials.</p> / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/14110 |
| Date | 04 1900 |
| Creators | Oboudi, Marjan |
| Contributors | Pietruszczak, S., Razaqpur, G. A., Civil Engineering |
| Source Sets | McMaster University |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0018 seconds