Return to search

Intercalação de lítio em filmes finos de óxido de molibdênio

Orientador: Annette Gorenstein / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Fisica "Gleb Wataghin" / Made available in DSpace on 2018-07-23T15:38:40Z (GMT). No. of bitstreams: 1
Cruz_TersioGuilhermedeSouza_M.pdf: 3092968 bytes, checksum: 8aafd4095373c01d1bb0d46fe9abf2b7 (MD5)
Previous issue date: 1998 / Resumo: Neste trabalho foram estudadas as propriedades de filmes finos de óxido de molibdênio depositadas por sputtering reativo, variando-se o fluxo de oxigênio (f) durante a deposição e mantendo-se os outros parâmetros de deposição constantes.
A microestrutura e a composição dos filmes foram analisadas por Difração de Raios-X, Retroespalhamento de Rutherford e Espectroscopia de Fotoelétrons.
O filme depositado em mais baixo fluxo de O2 foi identificado como MoO2. Com o aumento de f, os filmes evoluíram segundo o esquema: amorfo => (MoO2.8+a-MoO3)=>b-MoO3=> (MoO2.8+b-MoO3).
O comportamento das amostras frente à intercalação eletroquímica foi estudado em meio orgânico, contendo íons Li+, acompanhando-se as variações de transmitância (efeito eletroquímico) e as tensões mecânicas envolvidas no processo de inserção/de-inserção reversível de íons/elétrons na rede cristalina. Todas as amostras, exceto a de composição MoO2, são eletrocrômicas. A variação de tensão mecânica, em média, foi de 108 N m-2, para uma carga intercalada de 20mC/cm2. O filme que apresentou conjuntamente as melhores propriedades ópticas e mecânicas tem estrutura b-MoO3 / Abstract: In this work, molybdenum oxide thin films deposited by reactive sputtering were studied. The oxygen flow (f ) during deposition was varied, and all other deposition parameters were maintained at constant values.
The microstructure and composition were studied by X-Ray Diffraction, Rutherford Backscattering Spectrometry and X-Ray Photoelectron Spectroscopy.
The film deposited at the lowest f was identified as MoO2. With the increase of f , the following microstructures were obtained: amorphous ® (MoO2.8 + a -MoO3) ® b -MoO3 ® (MoO2.8 + b -MoO3).
The behavior of the samples upon intercalation was studied in a non-aqueous electrolyte containing Li+ ions. The transmittance changes and the induced mechanical stresses were followed during the reversible insertion/extraction of ions/electrons in the oxide structure.
All samples, with the exception of the MoO2 film, showed an electrochromic behavior. The transmittance changes, for the best sample, was 70%. The mechanical stress changes was 108 N m-2. The film which allied the best optical and mechanical behaviour showed the b -MoO3 structure / Mestrado / Física / Mestre em Física

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.unicamp.br:REPOSIP/277349
Date19 February 1998
CreatorsCruz, Tersio Guilherme de Souza, 1967-
ContributorsUNIVERSIDADE ESTADUAL DE CAMPINAS, Gorenstein, Annette, 1953-, Scarminio, Jair, Moraes, Mário Antônio Bica de
Publisher[s.n.], Universidade Estadual de Campinas. Instituto de Física Gleb Wataghin, Programa de Pós-Graduação em Física
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Format55f. : il., application/pdf
Sourcereponame:Repositório Institucional da Unicamp, instname:Universidade Estadual de Campinas, instacron:UNICAMP
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0019 seconds