Friction Bit Joining (FBJ) is a method used to join lightweight metals to advanced high-strength steels (AHSS). The automotive industry is experiencing pressure to improve fuel efficiency in their vehicles. The use of AHSS and aluminum will reduce vehicle weight which will assist in reducing fuel consumption. Previous research achieved joint strengths well above that which was required in three out of the four standard joint strength tests using DP980 AHSS and 7075 aluminum. The joints were mechanically tested and passed the lap-shear tension, cross-tension, and fatigue cycling tests. The t-peel test configuration never passed the minimum requirements. The purpose of continuing research was to increase the joint strength using FBJ to join the aluminum and AHSS the automotive industry desires to use specifically in the t-peel test. In this study FBJ was used to join 7085 aluminum and GADP1180 AHSS. The galvanic coating on the AHSS and its increased strength with the different aluminum alloy required that all the tests be re-evaluated and proven to pass the standard tests. FBJ is a two-step process that uses a consumable bit. In the first step the welding machine spins the bit to cut through the aluminum, and the second step applies pressure to the bit as it comes in contact with the AHSS to create a friction weld.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-7400 |
| Date | 01 June 2016 |
| Creators | Atwood, Lorne Steele |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0018 seconds