In Sweden, the residential and industrial energy demand is provided by a significant part of district heating. In a decarbonization plan to reduce the CO2 emissions, the integration of a large-scale solar system in the district heating can be a suitable option. The most used types of collectors are flat plate collectors (FPC), for which efficiency drops at high temperature levels. Parabolic through collectors (PTC) have seen increased interest in later years, due to their higher efficiency at higher temperature levels, which could improve system performance both energetically and economically. A hybrid concept using a combination of FPC and PTC for a solar thermal system has previously been studied for a solar district heating system in Denmark, with the aim to maximize the solar production by operating the solar collectors in the temperature ranges where they excel. The first aim of this thesis was to adapt the hybrid solar system in a district heating system for a Swedish case study and to evaluate if the hybrid optimization studied has similar positive effects in the overall thermal production of the system in Sweden, as it did in Denmark. The second aim of this thesis was to investigate the use of photovoltaic thermal collectors (PVT) instead of FPC for parts of the solar thermal system. With PVT, a single solar collector module allows for simultaneous production of heat and electricity and integration of photovoltaic thermal collectors in the solar assisted district heating could improve the overall performance of the system, both in terms of energy production and economical gain.The study was performed using the simulation tool TRNSYS based on a model developed in a danish case study. It was performed a parametric analysis on the percentage of share of the different types of solar collectors in the total area. The results given from the simulations have been used to carry out an economic evaluation based on the levelized cost of substituted energy, the annual operation and maintenance costs, and the marginal operational cost difference between a conventional district heating system supplied by a boiler only and a solar assisted district heating system. Based on the results found, it has been proved that a greater proportion of parabolic trough collectors in the solar field contribute to a greater production of thermal energy but also to higher expenses in the economy of the project. The best configuration which balanced these two factors was composed by 70 % of flat plate collectors and 30 % of parabolic trough collectors, based on the total area. The integration of photovoltaic thermal has been demonstrated to be not cost-effective for the studied location compared to the optimized ratio of FPC to PTC, mainly due to the high and uncertain price of the new technology. The use of photovoltaic thermal system is not yet widely developed in projects and there are only a few existing projects in operation today. In the future, the development of photovoltaic thermal in solar assisted district heating projects might have a higher realizable economic potential due to the industry learning curve, but more studies will need to be performed on this.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:du-38913 |
Date | January 2021 |
Creators | Giorgio, Lucrezia |
Publisher | Högskolan Dalarna, Institutionen för information och teknik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0052 seconds