Environmental and economic factors demand radical advances in solar cell technologies. Organic and polymer photovoltaics emerged in the 1990's that have led to low cost per unit area, enabled in significant part by the convenient manufacturing of roll-to-roll-processible solution-cast semiconductors. Colloidal quantum dot solar cells dramatically increase the potential for solar conversion efficiency relative to organics by enabling optimal matching of a photovoltaic device's bandgap to the sun's spectrum.
Infrared-absorbing colloidal quantum dot solar cells were first reported in 2005. At the outset of this study in 2007, they had been advanced to the point of achieving 1.8% solar power conversion efficiency. These devices degraded completely within a few hours’ air exposure. The origin of the extremely poor device stability was unknown and unstudied. The efficiency of these devices was speculated to be limited by poor carrier transport and passivation within the quantum dot solid, and by the limitations of the Schottky device architecture.
This study sought to tackle three principal challenges facing colloidal quantum dot photovoltaics: stability; understanding; and performance.
In the first part of this work, we report the first air-stable infrared colloidal quantum dot photovoltaics. Our devices have a solar power conversion efficiency of 2.1%. These devices, unencapsulated and operating in an air atmosphere, retain 90% of their original performance following 3 days’ continuous solar harvesting. The remarkable improvement in device stability originated from two new insights. First, we showed that inserting a thin LiF layer between PbS film and Al electrode blocks detrimental interfacial reactions. Second, we proposed and validated a model that explains why quantum dots having cation-rich surfaces afford dramatically improved air stability within the quantum dot solid.
The success of the cation-enrichment strategy led us to a new concept: what if - rather than rely on organic ligands, as all prior quantum dot photovoltaics work had done - one could instead terminate the surface of quantum dots exclusively using inorganic materials? We termed our new materials strategy ionic passivation. The goal of the approach was to bring our nanoparticles into the closest possible contact while still maintaining quantum confinement; and at the same time achieving a maximum of passivation of the nanoparticles' surfaces.
We showcase our ionic passivation strategy by building a photovoltaic device that achieves 5.8% solar power conversion efficiency. This is the highest-ever solar power conversion efficiency reported in a colloidal quantum dot device. More generally, our ionic passivation strategy breaks the past tradeoff between transport and passivation in quantum dot solids. The advance is relevant to electroluminescent and photodetection devices as well as to the record-performing photovoltaic devices reported herein.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/26245 |
| Date | 17 February 2011 |
| Creators | Tang, Jiang |
| Contributors | Sargent, Edward H. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.1063 seconds