The thesis is focused on the design of the production of kettle grill lid from steel 11 305 (1.0338) with a constant wall thickness of 1 mm and a series of 10 000 pcs/year. For the selected method of manufacture by conventional drawing, technological calculations were performed. Depending on the diameter of the blank, maximum force and other parameters, the tool and the machine were designed. The tool is a single-operation drawing tool with a blank holder and a rib around the perimeter. These functional parts, together with the drawing punch and drawing die, are made of surface-treated cementitious steel 14 220 (1.7131). The drawing tool is clamped into a CBA 250 hydraulic press with a nominal force of 2 500 kN, where the blank holder is controlled by an additional device at the bottom of the press.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318379 |
| Date | January 2017 |
| Creators | Míka, Tomáš |
| Contributors | Staněk, Vojtěch, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds