The diploma thesis present technology production of draining outlet. This is a rectangular deep drawn part, where basic shape is formed in two towing operations now. The used material is an austenitic stainless steel 17 240 with thickness 1 mm. According to the entry documentation the production technology was not change – current technology (it means drawing without thinning the wall) is most suitable. Based on technological and control calculations two-operations production was determined, which will take place in the united conventional instrument. The hydraulic press with marking Dieffenbacher PO250, which has a magnetic tool clamping, per stroke will perform here both operations. The payback was calculated for yearlong production 50 000 pieces after 0,8 years. The proposed production will make the current production more efficient including economic benefits.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402503 |
Date | January 2019 |
Creators | Rérych, Pavel |
Contributors | Staněk, Vojtěch, Podaný, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.1387 seconds