Thesis (MScEng (Mechanical and Mechatronic Engineering))--Stellenbosch University, 2008. / This study evaluates the performance characteristics of a power plant incorporating a steam turbine and a direct air-cooled dry/wet condenser operating at different ambient temperatures. The proposed cooling system uses existing A-frame air-cooled condenser (ACC) technology and through the introduction of a hybrid (dry/wet) dephiegmator achieves measurable enhancement in cooling performance when temperatures are high. In order to determine the thermal-flow performance characteristics of the wet section of the dephlegmator, tests are conducted on an evaporative cooler. From the experimental results, correlations for the water film heat transfer coefficient, air-water mass transfer coefficient and the air-side pressure drop over a deluged tube bundle are developed. During periods of high ambient temperatures the hybrid (dry/wet) condenser operating in a wet mode can achieve the same increased turbine performance as an oversized air-cooled condenser or an air-cooled condenser rith adiabatic cooling (spray cooling) of the inlet air at a considerably lower cost. For the same turbine power output the water consumed by an air-cooled condenser incorporating a hybrid (dry/wet) dephlegmator is at least 20% less than an air- cooled condenser with adiabatic cooling of the inlet air. / Sponsored by the Centre for Renewable and Sustainable Energy Studies, Stellenbosch University
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/350 |
| Date | 12 1900 |
| Creators | Heyns, Johan Adam |
| Contributors | Kroger, D. G., Stellenbosch University. Faculty of Engineering. Dept. of Mechanical and Mechatronic Engineering. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Rights | Stellenbosch University |
Page generated in 0.0017 seconds