A pilot scale machine was designed and constructed to allow study of the continuous microwave drying at 2.45 GHz of paper impregnated with water or with phenol formaldehyde resin. This equipment could deliver microwave power at levels up 2.90 KW.
Resin impregnated paper dried by microwaves showed better resin distribution, abrasion resistance, and internal bond strength when compared to similar papers dried in a hot air natural convection
oven. No significant differences in tensile strength, stretch, Young's modulus, or bending strength were observed.
A quantitative method for the determination of resin distribution
was devised.
Overall efficiencies for the microwave drying based on power input to the microwave power supply were of the order of 50 to 70%. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/34445 |
| Date | January 1970 |
| Creators | Minami, Shusuke |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0051 seconds