Return to search

Investigation of a micromachined electric field mill to maximize the electrostatic field sensitivity

This thesis includes the modification and optimization to an electric field mill based on micromachining technology. The sensor was originally designed to overcome the disadvantages of the conventional macroscopic field mill. Although it achieved all these listed above with a minimum detectable field strength at 42 V/m, some drawbacks are yet to be settled. In order to overcome these drawbacks, modifications are studied and put forward. Metal coating of the sensor surface could lead to a good electrical grounding that addresses the charging problem. Non-resonant working design was established with a shutter displacement around 5μm. Finite element simulations were set up to look into the optimizations of the structure parameters of the sensor, focusing on the shutter and electrodes. Moreover, the fabrication process was also studied with attempts of each step carried out in the NSFL of University of Manitoba.

Identiferoai:union.ndltd.org:MANITOBA/oai:mspace.lib.umanitoba.ca:1993/8922
Date24 September 2012
CreatorsZhou, Yu
ContributorsShafai, Cyrus (Electrical and computer engineering), Martin, Jeffery W. (Physics and Astronomy) Kordi, Behzad (Electrical and Computer engineering)
Source SetsUniversity of Manitoba Canada
Detected LanguageEnglish

Page generated in 0.0022 seconds