The project elaborated in frame of the engineering studies branch N2326 presenting the design of manufacturing technology of forging carrier of steel 14 220. Pursuant to the literary pursuit a problem of solid hot forming was proposed to product by drop forging with flash on 3 forging operations. All the operations are realized on the vertical crank forging press LZK 4000 B produced by ŠMERAL BRNO a.s. with nominal forming force 40 NM. Heating material on the forging temperature 1100 °C will proceed in the electric induction furnace produced by ROBOTERM s.r.o. type KSO 800kW, the flash trimming on the trimming press LDO 315 A/S with nominal forming force 3,15 MN. Dies are made from tool steel 19 552.9 and strapped in die holder QLZK 4000/UC. A part of the project is technical economic analysis evaluation and elaboration of production scheme. Expected annual volume is 100 000 pieces.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228127 |
Date | January 2008 |
Creators | Pluskal, Martin |
Contributors | Štroner, Marek, Kopřiva, Miloslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds