Return to search

Výroba napáječky / Production of drinker

The diploma thesis of the master's study in the field of M2I-K presents a design of a hollow rotating part made of metal sheet with a tapering bottom. Deep drawing technology was chosen as the best suited option for production without thinning the wall. Stainless steel was chosen as a source material for production parts in compliance to ČSN 172 40. The drinker is produced by three drawing operations where each operation is performed separately on a standalone press CTH 250 developed by ŽĎAS a. s. A sheet measuring 1500 x 3000 x 1 mm with diameter 428 mm was evaluated as the most economically viable for production of a semi-finished product – rondel. For one year production produced in a series of annual volume 100,000 pieces.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417132
Date January 2020
CreatorsVašíček, Jan
ContributorsDvořák, Milan, Císařová, Michaela
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0023 seconds