The aim of this thesis is an analysis of the construction of a cable trailer VARIANT 200. For the calculation of load states was used a multi body system in program MSC.ADAMS. The results from these calculations were used as lifting conditions for strength control with finite element method (FEM). All acquired results were analysed and according to them changes were made to the frame construction. Part of this thesis contains drawings documenting the above mentioned changes.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229427 |
| Date | January 2011 |
| Creators | Blažek, Jaroslav |
| Contributors | Kašpárek, Jaroslav, Kašpárek, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds