Return to search

Comportement du Zircaloy-4 recristallisé : identification du comportement anisotrope pour application à la situation d’accident de réactivité / Mechanical Behaviour of Zircalloy-4 recritallized alloy : anisotropic behaviour identification for the reactivityinitiated accident situation

La texture marquée des tôles et des gaines en alliages de zirconium se traduit par une forte anisotropie du comportement mécanique. L'objectif de l'étude est de caractériser et de modéliser le comportement anisotrope de tôles en alliage de Zircaloy-4 recristallisé. La caractérisation de l'anisotropie du comportement est réalisée au travers d'essais mécaniques conventionnels (chargements en traction et en cisaillement) sur tôles en utilisant la méthode de corrélation d'images numériques. Dans un premier temps, un modèle a été identifié à partir de cette base expérimentale sur tôle. La loi est validée par des calculs éléments finis d'essais de traction sur éprouvettes plates entaillées. Dans un second temps, la transférabilité du modèle de la tôle vers le tube a été étudiée. Pour les chargements uniaxiés, la transférabilité est avérée. En revanche, pour les chargements biaxiés la transférabilité est moins bonne. Une réidentification des paramètres gérant l'anisotropie du comportement en intégrant à la base d'identification un essai équibiaxié sur tube a été nécessaire. / Zirconium alloy sheet and clad are strongly textured materials, resulting in sharp anisotropic mecanical behavior. The purpose of this work is to characterize and model the anisotropic behavior of recrystallized Zircaloy-alloy sheets. Anisotropy is investigated by usual mechanical tests (tensile and shear loadings) performed on sheet material using digital image correlation measurments. A model is identified from this experimental database obtained on sheet material. Finite element simulations of tensile notched tests are used to validate the law. Then, the model transferability from the sheet to the rod is studied. The transferability is suitable for uniaxial loading. On the contrary, the transferability is not fully adequate for biaxial loadings. Therefore, a new identification of parameters dealing with anisotropy from enriched database with an equibiaxial rod test is necessary.

Identiferoai:union.ndltd.org:theses.fr/2015ENMP0020
Date22 September 2015
CreatorsBosso, Elodie
ContributorsParis, ENMP, Besson, Jacques
Source SetsDépôt national des thèses électroniques françaises
LanguageFrench
Detected LanguageFrench
TypeElectronic Thesis or Dissertation, Text

Page generated in 0.0089 seconds