The thesis is the preparation of practice of mechanics in physics lessons with the use of the educational system Pasco. At the beginning, there is a concise introduction with the educational systems; specifically the description of the Pasco system and description of individual sensors from basic set of sensors for physics, some of them are used in the implementation of laboratory tasks. This part also includes the Control software, Pasco DataStudio and the possibilities of further processing of the values using a spreadsheet. Next part of thesis deals with measurement methods, measurement errors and processing of measurement results in measurement protocol. The following section contains a design of four tasks of mechanics. Each task contains an introductory section, the design of laboratory workout, the process of construction measuring system, assignment, worksheet and procedure for resolving task. The first two tasks are focused on friction, the third task deals with the movement of the point on the circle and the last, the fourth role is focused on the motion of a body on an inclined plane. As part of the Annex are elaborated protocols of individual measurements and photographic documentation of the production process of measuring sets. In the conclusion there are evaluated results of individual measurements, which are based on practical verification in physics lessons at Secondary Technical School of Mechanical and Civil Engineering in Tabor.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:153388 |
| Date | January 2013 |
| Creators | DVOŘÁK, Jiří |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0011 seconds