One of the important parameters observed during extruded fibre fabrication is its diameter. The diameter can be measured with a single scanning camera assuming that the fibre section has a circular shape. As proved in practice, another important parameter is ovality, that is the rate of fibre flattening. This paper assumes that the fibre section shape is elliptical. In such a case, at least three different views on examined fibre are needed. Mathematical part of this paper is concerned with analytical description of fibre ovality measurement using two different approaches based on the knowledge of linear algebra, projective geometry and conic sections theory. Main goal of this paper is thus to use both mathematical theory and image analysis methods for ovality and diameter determination. Precise calcluation of such quantities is, however, conditioned on precise camera system calibration, which is described in the paper as well. Additionally, the work contains a brief mention of technical realization of ovality measurement and its possible difficulties.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401570 |
Date | January 2019 |
Creators | Loučka, Pavel |
Contributors | Martišek, Dalibor, Štarha, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds