A space camera is a promising candidate to address the non-stop rising interest for astrophysics research in the Compton regime. The MeVCube mission is intended to be launched in 2022, hosting an on-board Compton Camera. To better support the development of the instrument in this early stage, a series of feasibility studies to assess two potential launch orbits were performed. The studies were composed by a series of mission analysis simulations which permitted the characterisation of the orbital environments for the two orbital options. Several sources of background noise to the instrument were identified. The population of trapped protons and trapped electrons were simulated for the periods of Solar Minimum and Solar Maximum, as well as the levels of Galactic Cosmic Ray (GCR) flux. The performance of trade-off studies concluded that an equatorial orbit is more preferable for reducing the influence of background noise. To better estimate the environment effects at the equatorial orbit, the number of particles which can penetrate the detector shielding were simulated. The next step was to perform a series secondary studies whose aim were to simulate the induced current on the electrodes, produced by the interactions occurring within the detector. The actualisation of these simulations required the study of photon interaction with matter, the various Cadmium-Zink-Telluride (CZT) types and the how they operate, and the use of a sophisticated software to perform the appropriate simulations. COMSOL, which allows the method of FEA, was chosen as the tool to perform the simulations. The geometry of the detector voxel was primarily designed in SIEMENS NX. The geometry was inserted into COMSOL, where a number of iterations were performed to finalise the appropriate mesh size, which ensured an accurate representation of the Electric field and the Weighting potential within the detector voxel. The induced current on the electrodes was decided to be calculated via MATLAB. As a verification step it was thought useful to firstly plot the weighting potential of the three electrodes under test; the chosen anode pixel, the steering grid and the cathode. The process revealed a series of numerical errors, most likely introduced by the type of mesh chosen or by the data manipulation process via MATLAB. Significant reduction of the numerical errors would lead to more accurate values for the induced current. Unfortunately, due to time constraints this was a task that was not completed. Solving this problem would be optimal for future studies with MATLAB, as the induced current on the electrodes can be correctly calculated based on charge transport within the detector bulk. / MeVCube, DESY
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-80758 |
| Date | January 2019 |
| Creators | Athanasiou, Eleni |
| Publisher | Luleå tekniska universitet, Rymdteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0025 seconds