The motivation of the research presented in this thesis was to investigate the potential of using a commercial 2.3 kW heat pump dehumidifier (HPD) simultaneously as a dryer for high-moisture agricultural products and for other domestic dehumidification/heating applications. A drying system incorporating the HPD was designed and constructed, along with instrumentation to gather data on the properties of process air as well as real-time weight of the material being dried. The HPD was equipped with an external water-cooled condenser that rejected excess heat out of the system. The design of the system allowed for conducting drying with recirculation of air as well as use of electrical heaters. In an open mode, the drying could be carried out simultaneously with room dehumidification and water heating in the secondary condenser. / The drying experiments were conducted with apple, tomato and agar gels. The system was found to be more effective in drying of material with higher amount of free moisture such as tomato. Comparisons were made between HPD assisted drying (partial and complete) and hot air drying (at 45°C and 65°C) in the same system using apple as the test material. Colour changes (L*a*b* values) in the samples were compared between treatments. It was observed that the degree of undesirable colour change was least in case of the HPD assisted system. The HPD dried fruit exhibited better rehydration properties than the hot air dried samples. Water activity of the HPD dried samples was noticeably lower than that of the hot air dried samples at the same water content, indicating that the residual moisture was probably held under higher tension. Histological observation indicated that there was a lesser degree of damage to the cellular structure of apple when dried with the HPD than when dried with hot air alone. / In terms of energy consumption, the process of HPD assisted drying is more expensive. Much of the energy input is rejected at the secondary condenser as excess heat. Unless this heat is recovered for another purpose, or the system is modified to reuse it for drying, the drying process must carry this loss entirely. The specific moisture extraction rate (SMER) for apple was as low as 0.1 kg per kWh with the HPD assisted system. The SMER values for drying at 45°C was 0.5 kg per kWh and was almost 0.8 kg per kWh at 65°C. / The HPD assisted drying system demonstrated the ability of heat pumps to link different energy related activities viz., drying, space dehumidification and water heating. The energy expenditure is expected to be impressive when considered for all the related applications. The concept of utilizing heat pumps on farms to link up different energy streams for better utilization of the low-grade heat sources is discussed. A possible drying efficiency assessment in the form of energy-based evaluation is proposed.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.38285 |
Date | January 2002 |
Creators | Sosle, Venkatesh. |
Contributors | Raghavan, G. S. V. (advisor) |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Doctor of Philosophy (Department of Agricultural and Biosystems Engineering.) |
Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
Relation | alephsysno: 001872482, proquestno: NQ78777, Theses scanned by UMI/ProQuest. |
Page generated in 0.0014 seconds