The thesis deals with the design and creation of a weather station suitable for gardeners. The created device is able to measure temperature, pressure, humidity, amount of precipitation, wind speed and direction, UV index and also temperature and soil moisture at several depths. The weather station is powered by a battery with auxiliary charging from a photovoltaic panel. The thesis is divided into several parts. The theoretical part describes the individual physical principles of measurement of the considered physical quantities. Subsequently, a comparison of available sensors is made and then a final selection is made. The third part deals with the design and implementation of the hardware circuitry including the creation of the PCB. In this section, the holders of each sensor are also designed for printing on a 3D printer, which are then printed. The fourth section deals with software design issues, which is described in more detail. Finally, the whole weather station is assembled, wired and the functionality of all components is verified by sending the measured data to Thingspeak.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442383 |
| Date | January 2021 |
| Creators | Mlčák, Petr |
| Contributors | Kiac, Martin, Caha, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds