Return to search

PACKET-BASED TELEMETRY NETWORKS OVER LEGACY SYSTEMS

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / The telemetry industry anticipates the tremendous potential value of adding full networking
capability to telemetry systems. However, much of this potential can be realized while working
with legacy equipment. By adding modules that interface transparently to existing equipment,
continuous telemetry data can be encapsulated in discrete packets for over the air transmission.
Packet fields can include header, sequence number and bytes for error detection and correction.
The RF packet is transmitted without gaps through a standard serial interface and rate adjusted
for the packet overhead – effectively making packetization transparent to a legacy system. The
receiver unit performs packet synchronization, error correction, extraction of stream quality
metrics and re-encapsulation of the payload data into an internet protocol (IP) packet. These
standard packets can then be sent over the existing network transport system to the range control
center. At the range control center, the extracted stream quality metrics are used to select the best
telemetry source in real-time. This paper provides a general discussion of the path to a fully
realized, packet-based telemetry network and a brief but comprehensive overview of the
Hypernet system architecture as a case study.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/604806
Date10 1900
CreatorsO’Connell, Tim
ContributorsNova Engineering, Inc.
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0019 seconds