The self-centering energy dissipative (SCED) brace is an innovative cross-bracing system that eliminates residual building deformations after seismic events and prevents the progressive drifting that other inelastic systems are prone to experience under long-duration ground motions. This research improves upon the design and use of SCED braces through three large-scale experimental studies and an associated numerical building model study. The first experimental study increased the strength capacity of SCED braces and refined the design procedure through the design and testing of a new high-capacity full-scale SCED brace. This brace exhibited full self-centering behaviour and did not show significant degradation of response after multiple earthquake loadings. The second experimental study extended the elongation capacity of SCED braces through the design and testing of a new telescoping SCED (T-SCED) brace that provided self-centering behaviour over a deformation range that was two times the range that was achieved by the original SCED bracing system. It exhibited full self-centering in a single storey full-scale frame that was laterally deformed to 4% of its storey height. The third experimental study confirmed the dynamic behaviour of a multi-storey SCED-frame in different seismic environments and confirmed the ability of computer models of differing complexity to accurately predict the seismic response. To achieve these goals, a three-storey SCED-braced frame was designed, constructed, and tested on a shake table. Lastly, a numerical
six-storey SCED-braced building model was constructed. This model used realistic brace properties that were determined using a new software tool that simulates the full detailed mechanics of SCED and T-SCED
braces. The building model showed that initial SCED brace stiffness does not have a significant effect on SCED frame behaviour, that T-SCEDs generally perform better than traditional SCEDs, and that the addition of viscous dampers in parallel with SCED braces can significantly reduce drifts and accelerations while only causing a small increase in the base shear.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/35815 |
| Date | 07 August 2013 |
| Creators | Erochko, Jeffrey A. |
| Contributors | Christopoulos, Constantin |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0018 seconds