This thesis deals with mechanical design of FDM 3D printer with a built-in material feeder with monitoring of remaining material. The aim of this thesis is designing the FDM 3D printer with minimum print volume of 200x200x200 mm and with usage of measured data for optimising the 3D printing process. This 3D printer is targeted to the non-experienced users, so the emphasis was on ease of use and reliability of the printer. Despite the fact that it is an innovative design solution, the suitability of the design was verified experimentally as part of this thesis. The choice of the material feeder design, which is essential for the presented thesis, was justified by the realization of prototypes of two suitable designs, from which the optimal solution was chosen. The knowledge obtained from testing the prototypes was then used for the final design of 3D printer. The usage of data for optimization of the printing process is realized by a C++ compatible source code that is a part of this thesis.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417722 |
Date | January 2020 |
Creators | Puchta, Daniel |
Contributors | Huzlík, Rostislav, Pavlík, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds