This diploma thesis is engaged in calculation of contact pressure from thickness of lubricating film using Finite Element Method (FEM). Within my diploma thesis were performed the calculations concerning to non-conformal surfaces with a view to elastohydrodynamic lubrication. The simulations were done for disk and ball contact, respectively with burnished finish and also with surface which contains small dent. Flow diagram was designed so that the creation of geometry, boundary conditions and results saving is controlled parametrically. With using parameters it is possible to repeat the calculation when the resolution, geometry, etc. will be changed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228649 |
Date | January 2009 |
Creators | Kozel, Lubomír |
Contributors | Hartl, Martin, Vaverka, Michal |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds