This diploma thesis deals with the proposal of methodology for film thickness eva- luation within compliant contacts. With respect to characteristics of such contact pairs, like variable film thickness, high surface roughness, or poor conductivity and reflectivity, the usage of conventional experimental methods is particularly complicated. In present study, an optical method based on the principle of fluo- rescent microscopy was employed in present thesis. An evaluation algorithm in- volving background normalization and calibration of fluorescent intensity to film thickness was created in a form of experimental software. The proposed algori- thm was validated by using elastohydrodynamic contact formed between ceramic ball and glass disc. The measured film thickness was compared with theoretical prediction, while very good agreement of obtained data was observed. Further, a series of experiments with compliant samples was conducted, while the central film thickness was evaluated as a function of mean speed, applied lubricant, ap- plied load and slide-to-roll ratio. The last part of the thesis is focused on results analysis and discussion considering the previously published literature.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231789 |
| Date | January 2015 |
| Creators | Dočkal, Kryštof |
| Contributors | Dzimko, Marián, Nečas, David |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds