Fir tree root forms are one way to retain turbine blades in turbine disks. These features are ruled surfaces that span the entire thickness of the disk and are usually machined by broaching. With increasing use of new heat resistant and difficult-to-machine materials, mechanical machining methods exhibit severe problems with tool wear and surface integrity. To mitigate these problems, thermal material removal processes such as Wire Electrical Discharge Machining (WEDM) are being considered in the aerospace industry. Developments in turbine design have led to a root form geometry in the form of an arc across the thickness of the disk in order to decrease the contact stress by increasing the contact area between blade and disk. A curved surface such as this cannot be produced by conventional WEDM as it is not a ruled surface. A novel WEDM process is being developed where an arc shaped curve is formed from an axially moving wire to allow for the production of such curved surfaces. / Thesis / Master of Applied Science (MASc) / Turbine blades are attached to turbine disks with specially shaped, straight slots called Fir Tree Root Forms (FTRF) that can be cut with broaching tools. Broaches wear out quickly because the disk is made of very difficult to cut material and the aerospace industry is starting to use Wire Electric Discharge Machining (WEDM), instead of broaching, to cut these slots since it can easily cut the material used. New turbine disk designs have curved slots, which can not be cut with a straight broach or wire, and a new process is therefore being developed which uses an arc-shaped wire to cut the desired curved shapes.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/18762 |
| Date | January 2016 |
| Creators | Gabriel, Salomon C. |
| Contributors | Koshy, Philip, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0018 seconds