This works begins by providing motivation for additional research and political interest in the use of passenger railway systems as a method of ‘green’ transportation. Additional motivation for the adoption of energy saving methods within new and existing railway systems is also provided. This motivation stems from the relatively small carbon dioxide emissions per passenger kilometer and large quantity of electrical energy used in association with passenger railway systems. In specific cases, both theoretical analyses and experimental implementations of energy storage in railway systems have shown a reduction in electrical energy use and/or vehicle performance gains. Current railway energy storage systems (ESS) commonly make use of battery or electric double layer capacitor (EDLC) cells. A review of select energy storage technologies and their application in railway systems is provided. For example, the developing Qatar Education City People Mover system makes use of energy dense batteries and power dense EDLCs to provide the range and power needed to operate without a conventional railway power source between stations, formally called catenary free operation.
As an alternative to combining two distinct energy storage technologies, this work looks at experimentally characterizing the performance of commercially available lithium ion capacitors (LiCs); a relatively new energy storage cell that combines characteristics of batteries and EDLCs into one cell. The custom cell testing apparatus and lab safety systems used by this work, and others, is discussed. A series of five tests were performed on two EDLC cells and five LiC cells to evaluate their characteristics under various electrical load conditions at multiple temperatures. The general conclusion is that, in comparison to the EDLC cells tested, the LiC cells tested offer a superior energy density however, their power capabilities are relatively limited, especially in cold environments, due to larger equivalent series resistance values.
The second topic explored in this work is the development of a MATLAB based DC powered passenger vehicle railway simulation tool. The simulation tool is connected to the experimental analysis of EDLC and LiC cells by comparing the volume and mass of an energy storage system needed for catenary free (no conventional DC power supply) operation between train stations using either energy storage technology. A backward facing modelling approach is used to quantify the drive cycle electrical power demands as a function of multiple vehicle parameters and driving parameters (eg. acceleration rate, travel distance and time).
Additional modelling methods are provided as a resource to further develop the simulation tool to include multiple vehicles and their interactions with the DC power supply. Completion of the multi-vehicle simulation tool with energy storage systems remains a task for future work. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/24073 |
| Date | January 2018 |
| Creators | Wootton, Mackenzie |
| Contributors | Emadi, Ali, Electrical and Computer Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0014 seconds