This thesis proposes, analyses and implements a fast and accurate real-time power system disturbances identification method based on an enhanced linear least squares algorithm for mitigation and monitoring of various power quality problems such as current harmonics, grid unbalances and voltage dips. The enhanced algorithm imposes less real-time computational burden on processing the system and is thus called ???efficient least squares algorithm???. The proposed efficient least squares algorithm does not require matrix inversion operation and contains only real numbers. The number of required real-time matrix multiplications is also reduced in the proposed method by pre-performing some of the matrix multiplications to form a constant matrix. The proposed efficient least squares algorithm extracts instantaneous sine and cosine terms of the fundamental and harmonic components by simply multiplying a set of sampled input data by the pre-calculated constant matrix. A power signal processing system based on the proposed efficient least squares algorithm is presented in this thesis. This power signal processing system derives various power system quantities that are used for real-time monitoring and disturbance mitigation. These power system quantities include constituent components, symmetrical components and various power measurements. The properties of the proposed power signal processing system was studied using modelling and practical implementation in a digital signal processor. These studies demonstrated that the proposed method is capable of extracting time varying power system quantities quickly and accurately. The dynamic response time of the proposed method was less than half that of a fundamental cycle. Moreover, the proposed method showed less sensitivity to noise pollution and small variations in fundamental frequency. The performance of the proposed power signal processing system was compared to that of the popular DFT/FFT methods using computer simulations. The simulation results confirmed the superior performance of the proposed method under both transient and steady-state conditions. In order to investigate the practicability of the method, the proposed power signal processing system was applied to two real-life disturbance mitigation applications namely, an active power filter (APF) and a distribution synchronous static compensator (D-STATCOM). The validity and performance of the proposed signal processing system in both disturbance mitigations applications were investigated by simulation and experimental studies. The extensive modelling and experimental studies confirmed that the proposed signal processing system can be used for practical real-time applications which require fast disturbance identification such as mitigation control and power quality monitoring of power systems
| Identifer | oai:union.ndltd.org:ADTP/215421 |
| Date | January 2006 |
| Creators | Manmek, Thip, Electrical Engineering & Telecommunications, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. Electrical Engineering and Telecommunications |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Thip Manmek, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.002 seconds