Lithium batteries have played an important role since early 1980’s to provide us with energy for small portable devices. Due to the increasing demand and limited availability of fossil fuels there is a need to shift to renewable energy. In this thesis, the fabrication procedure for the lithium ion coin cell is extensively analyzed. A brief introduction into the lithium ion battery is discussed, the physics and chemistry of the materials is explained. Emphasis is made on the importance of calendaring an electrode. LiFePO4 was mixed with the Super P, PVDF and NMP at appropriate stoichiometric amounts and half coin cells were produced with the reference electrode as lithium foil. The effects of calendaring in terms of discharge capacity, density profile and ac impedance was analyzed. The resulting material sample were analyzed in two parts, Sample A was left as is and Sample B was calendared. The calendared electrode exhibited a lower impedance when observed with the impedance test. The calendared electrode exhibited a higher discharge capacity of about 162 mAh/g at C/10 rate when compared to the uncalendared electrode with a discharge capacity of about 152 mAh/g at C/10. The experimental results were than compared to the simulated model constructed in Comsol Multiphysics. The coin cell model in COMSOL was started with use of the existing model for cylindrical cells. The parameters and equations required for the setup were analyzed and discussed. The comparison of the experimental vs simulated results yielded some preliminary information. However, this work is still in progress, for building further models with different materials for the coin cells. / A Thesis submitted to the Department of Electrical and Computer Engineering in partial fulfillment of the Master of Science. / Summer Semester 2017. / July 17, 2017. / Includes bibliographical references. / Pedro L. Moss, Professor Directing Thesis; Mark H. Weatherspoon, Committee Member; Petru Andrei, Committee Member.
| Identifer | oai:union.ndltd.org:fsu.edu/oai:fsu.digital.flvc.org:fsu_552046 |
| Contributors | Chepyala, Seshuteja (authoraut), Moss, Pedro L. (professor directing thesis), Weatherspoon, Mark H. (committee member), Andrei, Petru (committee member), Florida State University (degree granting institution), FAMU-FSU College of Engineering (degree granting college), Department of Electrical and Computer Engineering (degree granting departmentdgg) |
| Publisher | Florida State University |
| Source Sets | Florida State University |
| Language | English, English |
| Detected Language | English |
| Type | Text, text, master thesis |
| Format | 1 online resource (81 pages), computer, application/pdf |
Page generated in 0.0015 seconds