Return to search

Radiation Response and Reliability of High Speed AlGaN/GaN HEMTs

In recent years, GaN-based high-electron-mobility-transistors (HEMT) have demonstrated excellent high power and high frequency performance compared with counterparts based on other materials. Although AlGaN/GaN HEMTs are of great interest owing to the large band gap of GaN (3.4 eV), high breakdown field (~3.1 MV/cm), high saturation electron velocity (~2.5 Ã 107 cm/s) and the presence of a high-mobility two-dimensional electron gas (2DEG) at the hetero-interface, the reliability of devices can be limited by a number of factors, impeding the way to commercialization. GaN HEMTs have demonstrated very good radiation tolerance. In this work, the radiation response and reliability issues of AlGaN/GaN HEMTs grown using molecular beam epitaxy (MBE) are studied. Devices are subjected to 1.8 MeV proton irradiation and/or voltage stress are characterized via DC and RF measurements. Low frequency 1/f noise measurements are employed to help understand the defects that affect the reliability and radiation response of AlGaN/GaN HEMTs, and density functional theory (DFT) calculation is used to identify possible defect candidates. The temperature-dependent noise spectra show changes in defect distributions. Hydrogenated ON defects, Fe complexes and VGa-VN-Hx divacancies are some of the dominating defects limiting the device radiation response and reliability. The results of combined high field and radiation effects provide better insight into device response in practical space applications.

Identiferoai:union.ndltd.org:VANDERBILT/oai:VANDERBILTETD:etd-07262016-182142
Date27 July 2016
CreatorsCHEN, JIN
ContributorsRobert A. Weller, En Xia Zhang, Sokrates T. Pantelides, Ronald D. Schrimpf, Daniel M. Fleetwood
PublisherVANDERBILT
Source SetsVanderbilt University Theses
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.library.vanderbilt.edu/available/etd-07262016-182142/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to Vanderbilt University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0016 seconds