The research described in this thesis focuses on the mitigation of inter-turn short-circuit (SC) faults in Fault tolerant Permanent Magnet (FT-PM) machines. An analytical model is proposed to evaluate the inter-turn SC fault current accounting for the location in the slot of the short-circuited turn(s). As a mitigation strategy to SC faults at the design stage, a winding arrangement called VSW (Vertically placed Strip Winding) is proposed and analysed. The proposed analytical model is benchmarked against finite element (FE) calculation and validated experimentally. The results demonstrate that the proposed winding arrangement in the slot improves the fault tolerance (FT) capability of the machine by limiting the inter-turn SC fault current regardless the fault location in the slot. Electromagnetic and thermal studies are conducted to verify the merits and drawbacks of the proposed winding compared to the conventional winding using round conductors (RCW). The study shows that the proposed winding scheme, in addition to being fault-tolerant, has an improved bulk radial conductivity, can achieve a good fill factor, but has a significantly higher frequency-dependent AC copper loss. To predict the AC losses an analytical model based on an exact analytical 2D field solution is proposed. This model consists of first solving the two-dimensional magneto-static problem based on Laplace’s and Poisson’s equations using the separation of variables technique. Then, based on that solved solution, by defining the tangential magnetic field (Ht) at the slot opening radius, Helmholtz’ equation is solved in the slot sub-domain. Subsequently, an FE and MATLAB® coupled parametric design is undertaken to maximise the VSW wound machine’s efficiency whilst maintaining its FT capability. The proposed analytical models for prediction of the SC fault current and AC copper losses are integrated into the coupled optimisation. It is shown that the effective losses of the VSW can be minimised through the parametric design while maintaining the required level of machine performance. Using an existing FT-PM machine of which the rotor is kept unchanged two stators were designed, manufactured and wound with RCW and VSW respectively and experimental tests are carried out to validate the analytical models and the new winding concept.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:594638 |
| Date | January 2013 |
| Creators | Arumugam, Puvaneswaran |
| Publisher | University of Nottingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://eprints.nottingham.ac.uk/13457/ |
Page generated in 0.0095 seconds