Shape memory alloys (SMAs) are a group of alloys that demonstrate the unique
ability of returning back to a previously defined shape or size if subjected to the
appropriate thermal procedure. They have been implemented as actuators in a
wide range of applications spanning several fields such as robotics, aeronautics,
automotive and even in medicine. Several controllers, linear and nonlinear, have
been designed to control these actuators. However, controlling these actuators is no
simple task as they are highly nonlinear due to the hysteresis inherent in them. In
fact, their control depends on two important factors: the thermal conditions they
are subjected to and the stress applied to them. The former can be further divided
into air flow and ambient temperatures. These thermal conditions determine the
amount of power needed to heat the SMA wire. In the SMA data sheets, manufacturers specify what they refer to as the "safe current" which is the maximum
current value that can be applied to the SMA wire indefinitely without burning it.
However, they specify this current value at room temperature and under certain
convection conditions. In the work presented here, the focus was the control of
SMA actuators under different ambient temperatures. Thus, in this research, the
main goal was to design and implement a controller that will actuate, or contract,
the SMA wire in approximately the same amount of time regardless of the ambient
temperatures with a fixed load applied to it.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OWTU.10012/5030 |
| Date | January 2010 |
| Creators | El Dib, Mohamed |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
Page generated in 0.0017 seconds