The need to characterise a PEM electrolyser is motivated by a South African hydrogen
company. One of two electrochemical characterisation methods, namely the current
interrupt method or electrochemical impedance spectroscopy, is investigated to
characterise the PEM electrolyser. Various literature sources can be found on the
electrochemical characterisation methods.
In this study the current interrupt method is used for the electrochemical characterisation
of a PEM electrolyser. The current interrupt method is an electrical test method
that will be used to obtain an equivalent electric circuit model of the PEM electrolyser.
The equivalent electric circuit model relates to various electrochemical characteristics
such as the activation losses, the ohmic losses and the concentration losses.
Two variants of the current interrupt method, namely the natural voltage response
method and the current switching method, are presented. These methods are used to
obtain two different equivalent electric circuit models of the PEM electrolyser. The
parameters of the first equivalent electric circuit, namely the Randles cell, will be
estimated with the natural voltage response method. The parameters of the second
equivalent electric circuit, namely the Randles-Warburg cell, will be estimated with
the current switching method.
Simulation models of the equivalent electric circuits are developed and tested. The
simulation models are used to verify and validate the natural voltage response method
and the current switching method. The parameters of the Randles cell simulation
model is accurately calculated with the natural voltage response method. The
parameters of the Randles-Warburg cell simulation model is accurately calculated with
the current switching method.
The natural voltage response method and the current switching method are also
practically implemented. The results is used to indicate the various electrochemical
characteristics of the PEM electrolyser. A Nafion 117 type membrane was tested with the current interrupt method. The membrane resistance parameters of Randles cell
were estimated with the natural voltage response method. These values are validated
with conductivity measurements found in literature. The results of the Randles-
Warburg cell is validated with a system identification validation model. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013
| Identifer | oai:union.ndltd.org:NWUBOLOKA1/oai:dspace.nwu.ac.za:10394/8741 |
| Date | January 2012 |
| Creators | Martinson, Christiaan Adolph |
| Publisher | North-West University |
| Source Sets | North-West University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds