Thesis deals with the design of a battery box with lithium-ion technology, for the largest possible driving range of the BUT SuperEL II electric car. Based on the analysis of the electric vehicle available space and the parameters of the electronic system, the maximum size of the entire set of 84s130p batteries was designed. 18650 cells with NMC technology were selected due to the very high gravimetric and volumetric density, which reaches 274 Wh/kg and 564 kWh/m3. The total nominal capacity of the designed battery boxes in the electric car is 138 kWh. The total gravimetric energy density of the designed box is 215.6 Wh/kg. It allows the electric car to reach the theoretical range with a consumption of 14 kWh/100 km of almost 1000 km. The individual battery modules of the battery box are controlled for optimal operating conditions by means of a BMS. The whole set is divided into 5 battery boxes. These boxes are manufactured using the technology of bent welded sheets from aluminum alloy EN AW 1050A and steel 1.4301. FEM analyzes were performed to verify the mechanical strength of the designed structure. The work also deals with the design of battery modules and their connection.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417532 |
| Date | January 2020 |
| Creators | List, Jaroslav |
| Contributors | Kalivoda, Milan, Polzer, Aleš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds