This master thesis deals with the electron beam welding of the AMS 5659 steel used in industry for special hydraulic cylinders (Fig. 1). A theoretical analysis of electron beam welding and analysis of the influence of selected welding parameters on penetration characteristics are in the first part of the thesis. The second part contains an evaluation of the implemented experimental penetrations on samples of the steel in the hardened condition H1025 and after solution heat. It was also done a properties assessment of the same samples that were been hardened again. The light microscopy (SM), the scanning electron microscopy (SEM) and the measurement method of hardness according to Vickers were used for evaluation and comparison of the steel properties in the region of penetration and the heat affected zones properties.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230799 |
| Date | January 2013 |
| Creators | Říčan, Daniel |
| Contributors | Foret, Rudolf, Kouřil, Miloslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds