Thermal barrier coatings (TBCs) are commonly used for thermal protection of components in modern gas turbine application and typically consisting of ceramic top coat and CoNiCrAlY bond coat (BC), both thermally sprayed. Nanostructured CoNiCrAlY bond coatings were deposited onto Ni-based alloy (Inconel 718) by both HVOF and CGDS spraying techniques. Subsequently the deposits were remelted by electron beam up to depth of about 100 m which resulted in removal of defects on the substrate to the bond coat interface. The primary objective of this thesis was to investigation of the influence of parameters used for EB remelting, including multiple remelting on the microstructural changes, phase modification and final state of the coatings. The amount of porosity in the coatings and surface roughness has been evaluated. Scanning electron microscopy and X-Ray diffraction were performed in order to characterize the phase modification before and after the applied treatment. The results indicated that multiple remelting process improved the coating properties in terms of porosity, smooth surface, strength and chemical homogeneity and at last but not least this study demonstrate that low-temperature processing of CoNiCrAlY bond coat represents an interesting and promising alternative for their manufacturing.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400832 |
Date | January 2019 |
Creators | Hroš, Michal |
Contributors | Moravčík, Igor, Krajňáková, Petra |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds