In mobile and handheld consumer electronic markets, product use conditions drive the requirement for mechanical strength and device durability. The majority of relatively large form factor electronic components in a laptop, mobile internet device, PDA, or mobile phone use an adhesive as a stiffener to help protect the component from physical stresses imposed by daily wear and tear. Described herein is an innovative solution referred to as Solid State Pre-Formed Electronics Adhesive (SPEA), which enables a decrease in circuit board manufacturing throughput time while increasing mechanical durability with a consistent and characterized adhesive application process.
Today, many consumer electronic ODM's (Original Design Manufacturers) and CM's (Contract Manufacturers) use a liquid adhesive dispensed after placement of an electronic component within the SMT (Surface Mount Technology) process. On average, this adds up to 60 seconds to the throughput time of a typical motherboard as the material needs to be applied and then cured. In addition, the current adhesive dispense application process is not tightly controlled and is highly variable depending on operator, material type, and circuit board density. Data will demonstrate that the effect of the adhesive deposition profile and consistency in application directly affects repeatable margin increase gains in a dynamic stress event.
In partnership with a specialty chemical company, a unique thermoset epoxy compound was designed to provide maximum component to circuit board interconnect strength while maintaining its form at ambient temperatures. When applied to electronics manufacturing, the compound has the following advantages over current solutions:
1. Reduced Manufacturing Processing Time: Enables a solution that can be transitioned transparently into a circuit board manufacturing facility which reduces the average processing time for a typical device motherboard.
2. Improved Application Repeatability: Enables a solution that increases adhesive deposition consistency and placement repeatability, critical in achieving improved dynamic performance.
3. Delivers a Reference, Characterized Solution: Current industry adhesive application techniques and materials vary widely and component manufacturers cannot validate reliability performance with a confident baseline. This is due to the high variability of performance in commercially available adhesives. SPEA provides a characterized adhesive solution with a clear baseline margin increase on which to evaluate dynamically stressed system performance.
The need to continually increase the resistance to component damage through dynamic testing is a critical aspect to consider given market trends and device roadmaps. Large component manufacturers have the opportunity to further embed themselves into untapped markets where portability and performance converge and drive the need for more robust packaging solutions. The development and application of SPEA will continue to maintain silicon and packaging reliability as consumer devices continue to shrink, becoming ever more portable.
| Identifer | oai:union.ndltd.org:pdx.edu/oai:pdxscholar.library.pdx.edu:open_access_etds-2842 |
| Date | 13 September 2013 |
| Creators | Cope, Alexander Randon |
| Publisher | PDXScholar |
| Source Sets | Portland State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Dissertations and Theses |
Page generated in 0.0019 seconds