Novel electrodeposition strategies have been developed for the fabrication of
thick adherent zirconia ceramic and composite coatings for biomedical applications. The new method is based on the electrophoretic deposition (EPD) of polyelectrolyte additives combined with the cathodic precipitation of zirconia. The method enables the room- temperature electrosynthesis of crystalline zirconia nanoparticles in the polymer matrix. Adherent crack-free coatings up to several microns thick were obtained. The deposits were studied by thermogravimetric and differential thermal analysis, X-ray diffraction analysis, scanning and transmission electron microscopy, and atomic force microscopy. Obtained results pave the way for electrodeposition of other ceramic-polymer composites. Novel advanced nanocomposite coatings based on bioceramic hydroxyapatite (HA) have been developed for the surface modification of orthopaedic and dental implant metals. HA nanoparticles prepared by a chemical precipitation method were used for the fabrication of novel HA-chitosan nanocomposite coatings. The use of chitosan enables room-temperature fabrication of the composite coatings. The problems related to the sintering of HA can be avoided. A new electrodeposition
strategy, based on the EPD of HA nanoparticles and electrochemical deposition of chitosan macromolecules, has been developed. The method enabled the formation of dense, adherent and uniform coatings of various thicknesses in the range of up to 60μm. Bioactive composite coatings containing 40.9-89.8 wt% HA were obtained. The deposit composition and microstructure can be tailored by varying the chitosan and HA concentrations in the deposition bath. A mathematical model describing the formation of the HA-chitosan composite deposit has been developed. X-ray studies revealed preferred orientation of HA nanoparticles in the nanocomposites. Obtained
coatings provide corrosion protection of the substrates and can be utilized for the fabrication of advanced biomedical implants. For further functionalization of the HA-chitosan composite coating, Ag and CaSi03 have been incorporated into the coating. Novel HA-Ag-chitosan and HA-CaSiO3-chitosan nanocomposite coatings have been deposited as monolayers, laminates, and coatings of graded composition. The obtained results can be used for the development of biocompatible antimicrobial coatings with controlled Ag+ release rate, and nanocomposite coatings with enhanced bioactivity. / Thesis / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/16630 |
| Date | 03 1900 |
| Creators | Pang, Xin |
| Contributors | Zhitomirsky, Igor, Materials Science and Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds