In hybrid pixel detector fabrication, high-density interconnection between focal plane array and the read-out integrated circuit is important. Bump bonding is the preferable assembly method, it is small in size, low cost, high performance and flexible I/O. Flip-chip bonding is a vertical connection technique of focal plane array and top substrate with solder bumps. In this paper, Flip-chip bonding by electroplated indium bumps is described. There are advantages of using indium as the solder material. It is relatively inexpensive, it has good thermal and electrical conductivity, it is ductile, and it is cryogenically stable. Indium bumps with a diameter of 30 µm are successfully prepared by an electroplating method, however removing indium conductive layer after electrodeposition is challenging. The corresponding electroplating indium bump process is also discussed. Electrical measurement was applied to detect the connection integrity of the flip-chip assemblies.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-27178 |
| Date | January 2015 |
| Creators | Yeshitela, Tizita |
| Publisher | Mittuniversitetet, Avdelningen för elektronikkonstruktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0036 seconds