<p>Electrochemical Transistor(ECT) was reported by David Nilsson in 2002. Later,its dimensios were specified and a SPICE model was developed.</p><p>The main purpose of this diploma work is to check the performance of electrochemical transistors in amplifier circuits. Simple amplifier circuits were simulated using SPICE model of ECT. Lateral and Vertical structures of electrochemical transistors were patterned on orgacon sheet(provided by AGFA),with various electrolytes(EG010,MS-HEC & MS-L). Characteric curves and time responses of these transistors were studied and then were then used as an active component in single amplifier circuits. Screen printed ECT's were also checked with the best available electrolyte. Behaviour of self made and screen printed ECT's were compared on the basis of on-off ratio,slew rate,frequency response and gain. Screen printed transistors showed promising results having less deterioration with time but till an an input signal frequency of 2Hz only. Mismatch with simulation results and Shockley's equation were other findings after data analysis.</p><p><img src="file:///C:/DOCUME%7E1/zia/LOCALS%7E1/Temp/moz-screenshot.jpg" /><img src="file:///C:/DOCUME%7E1/zia/LOCALS%7E1/Temp/moz-screenshot-1.jpg" /></p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-17924 |
| Date | January 2009 |
| Creators | Khan, Zia Ullah |
| Publisher | Linköping University, Department of Electrical Engineering |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | LiTH-ISY-Ex, ; 2008/4247-SE |
Page generated in 0.0181 seconds