Return to search

Forward modelling and inversion of streaming potential for the interpretation of hydraulic conditions from self-potential data

The self-potential method responds to the electrokinetic phenomenon of streaming potential and has been applied in hydrogeologic and engineering investigations to aid in the evaluation of subsurface hydraulic conditions. Of specific interest is the application of the method to embankment dam seepage monitoring and detection. This demands a quantitative
interpretation of seepage conditions from the geophysical data.

To enable the study of variably saturated flow problems of complicated geometry, a three-dimensional finite volume algorithm
is developed to evaluate the self-potential distribution resulting from subsurface fluid flow. The algorithm explicitly calculates
the distribution of streaming current sources and solves for the self-potential given a model of hydraulic head and prescribed distributions of the streaming current cross-coupling conductivity and electrical resistivity. A new laboratory apparatus is developed to measure the streaming potential coupling coefficient
and resistivity in unconsolidated soil samples. Measuring both of these parameters on the same sample under the same conditions
enables us to properly characterize the streaming current cross-coupling conductivity coefficient. I present the results of a laboratory investigation to study the influence of soil and fluid parameters on the cross-coupling coefficient, and characterize this property for representative well-graded embankment soils. The streaming potential signals associated with preferential seepage through the core of a synthetic embankment dam model are studied using the forward modelling algorithm and measured electrical properties to assess the sensitivity of the self-potential method in detecting internal erosion. Maximum self-potential anomalies are shown to be linked to large localized
hydraulic gradients that develop in response to piping, prior to any detectable increase in seepage flow through the dam. A linear
inversion algorithm is developed to evaluate the three-dimensional distribution of hydraulic head from self-potential data, given a known distribution of the cross-coupling coefficient and electrical resistivity. The inverse problem is solved by
minimizing an objective function, which consists of a data misfit that accounts for measurement error and a model objective function that incorporates a priori information. The algorithm is suitable
for saturated flow problems or where the position of the phreatic surface is known.

  1. http://hdl.handle.net/2429/235
Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVAU.2429/235
Date05 1900
CreatorsSheffer, Megan Rae
PublisherUniversity of British Columbia
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation

Page generated in 0.0019 seconds