Return to search

Implementation of A 30-Channel PCM Telemetry Encoder

International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California / The function of a PCM telemetry encoder, installed in moving vehicles such as automobiles,
aircraft, missiles, and artillery projectiles, is to transform many physical variables, such as
velocity, shock, temperature, vibration and pressure, into digital data. Also, the encoder is
required to make a data frame composed of digital input signals and frame synchronous data.
The framed data is supplied to the input of a transmitter.
There are three critical considerations in developing a PCM telemetry encoder to be installed in
an artillery projectile. The first is the performance consideration, such as sampling rate, data
receiving rate and data transmission rate. The second is the size consideration due to the severely
limited installation space in an artillery projectile and the last is the power consumption
consideration due to limitations of the munition’s power supply. To meet these three
considerations, the best alternative is a one-chip solution.
Using a commercially available TMS320F2812 DSP chip, we have implemented a 30-channel
PCM telemetry encoder to process randomized data frames, composed of 16-channel analog data,
14-channel digital data and 2 frame synchronization data per data frame, at 10Mbps transmission
baud rate.
This paper describes the structure of the 30-channel PCM telemetry encoder and its performance.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/604960
Date10 1900
CreatorsKim, Jung Sup, Jang, Myung Jin
ContributorsAgency for Defense Development
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0018 seconds