The use of Mineral Trioxide Aggregate (MTA) is gaining popularity among clinicians. Despite the many ideal qualities it possesses, it is often difficult to manipulate and often requires a second appointment for placement of a restoration to allow for setting. If the time to set of MTA can be accelerated to a single appointment time frame without significantly altering its properties, then MTA may gain even wider acceptance. The purpose of this study is to identify the percentage of a Portland Cement Accelerator (PCA), that when added to MTA, will decrease the time to set of MTA towards a single appointment time frame. Ten Teflon sample molds were prepared to hold 20 standardized chambers in each. Three sample molds were prepared with a 5.0% (by weight of MTA) accelerator, 3 with 10.0% accelerator and 3 with 15.0% accelerator mixed with MTA and water. Another sample mold contained a mixture of MTA and water only and acted as the control. Samples were tested using a dial indicator microgauge apparatus that measured the depth of needle penetration starting at 2 minutes and then every minute up to 15 minutes. Samples were also tested at 3, 4, 24, 48 and 72 hours. A mixed-model repeated measures ANOVA showed the four accelerator groups were significantly different and there was a significant time trend. The 5.0% accelerator group set significantly faster compared to the 15.0% and the control at 15 minutes or less (p<0.05). In conclusion, it appears that 5.0% PCA when added to MTA can accelerate the setting reaction.
Identifer | oai:union.ndltd.org:vcu.edu/oai:scholarscompass.vcu.edu:etd-1804 |
Date | 01 January 2004 |
Creators | Monts, M. Scott |
Publisher | VCU Scholars Compass |
Source Sets | Virginia Commonwealth University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Theses and Dissertations |
Rights | © The Author |
Page generated in 0.0019 seconds