Return to search

DeposiÃÃo de DiÃxido de Estanho-FlÃor (SnO2:F) em Substrato Transparente para Uso em CÃlulas FotoeletroquÃmicas / Fluorine-doped Tin Oxide Deposition on Transparent Substrate for Use in Solar Cells

FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico / Vidros condutores tÃm sido usados como Ãxidos condutores transparentes (OCTâs). Por causa da transmitÃncia na regiÃo visÃvel e baixa resistÃncia de filme os OCTâs tÃm sido usados como
componente de cÃlulas fotoeletroquÃmicas ativadas por corante. Neste trabalho à feito vidros condutores, em escala de laboratÃrio, de dimensÃes 2,6 cm x 7,6 cm pela tÃcnica âspray
pyrolysisâ, os vidros condutores sÃo aplicados na construÃÃo da cÃlula fotoeletroquÃmica com eletrodos imersos e da cÃlula de GrÃtzel. Para isso, alÃm de fazer vidros condutores à feito a
deposiÃÃo da camada de diÃxido de titÃnio dopado com prata (TiO2:Ag), preparaÃÃo de eletrÃlito, preparaÃÃo de corante, montagem das cÃlulas e caracterizaÃÃo por voltagem de
circuito aberto (Vca) e corrente de curto circuito (Icc). O vidro condutor possui um filme de diÃxido de estanho dopado com flÃor (SnO2:F). A deposiÃÃo do filme de SnO2:F sobre vidro à feito a temperatura de 600ÂC a parti de uma soluÃÃo precursora. Como fonte de calor usa-se uma resistÃncia cerÃmica conectada a um forno. Para a deposiÃÃo da soluÃÃo precursora à usado um gerador de âspray. As tÃcnicas difraÃÃo de raios x (DRX), microscopia de varredura eletrÃnica (MEV), UV-vis, resistÃncia elÃtrica e dureza de MÃhr sÃo usadas para caracterizar
o vidro condutor e o eletrodo SnO2:F/TiO2:Ag. O vidro condutor apresenta transmitÃncia ~70% (650 nm - 800 nm). O eletrodo de SnO2:F/TiO2:Ag apresenta refletÃncia ~20%. As cÃlulas sob iluminaÃÃo sÃo caracterizadas por Vca e Icc. A cÃlula de GrÃtzel com corante extrato de espinafre apresenta Vca = 0,264 V e Icc = 1,4 μA, enquanto que a cÃlula de GrÃtzel com corante azul de metileno apresenta Voc = 0,186 V e Icc = 3,5 μA. / The conductor glasses have been used as transparent conductor oxides (TCOâs). Due to its transmittance in the visible spectrum and low sheet resistance, TCOâs have been employed as a constituent component of photoeletrochemical cells activated with dye. This work is dedicated to the conductor glass fabrication, at a lab scale, on 2,6 cm x 7,6 cm glass substrates by spray pyrolyris method and application of the conductor glasses in photoeletrochemical
cells of the type GrÃtzel and immense electrode. The work involve the fabrication of the conductor glasses, deposition of the silver-doped titanium oxide (TiO2:Ag) films on conductor glasses, preparation of the electrolyte, choice and preparation of the dye and then to close and
to characterize of the cells by open circuit voltage (Voc) and short circuit current (Icc). The conductor glass is of the type fluorine-doped tin oxide (SnO2:F). The deposition of SnO2:F layer is make on the glass substrate with temperature of 600ÂC from precursor solution. The heat source is ceramic heater of flat surface in a stove. The spray gun is used for to deposit the precursor solution on glass substrate. The conductor glasses and electrodes of
SnO2:F/TiO2:Ag are characterized by measures of x-ray diffraction (XRD), scanning electron micrograph (SEM), UV-vis, electric resistance and MÃhr strong. The average transmittance of the conductor glass 70 % in the wavelength regions of 650 nm â 800 nm. The average reflectance of 20 % in the electrodes SnO2:F/TiO2:Ag with extract of spinach in the wavelength regions of 650 nm â 700 nm. In the characterization of the cells, measures of Voc and Icc are obtained for cells under illumination. To hotoeletrochemical cell of the type GrÃtzel with extract of spinach the measures are Voc = 0,264 V and Icc = 1,4 μA; while that for the photoeletrochemical cell of the type GrÃtzel with methylene blue the measures are Voc
= 0,186 V and Icc = 3,5 μA.

Identiferoai:union.ndltd.org:IBICT/oai:www.teses.ufc.br:6613
Date25 February 2013
CreatorsFrancisco Marcone Lima
ContributorsAna FabÃola Leite Almeida, Francisco Nivaldo Aguiar Freire, Pierre BasÃlio Almeida Fechine, Rui Carlos Barros da Silva
PublisherUniversidade Federal do CearÃ, Programa de PÃs-GraduaÃÃo em Engenharia MecÃnica, UFC, BR
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFC, instname:Universidade Federal do Ceará, instacron:UFC
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0016 seconds