In a world that relies heavily on electricity and portable energy, the development of high performing energy storage devices is crucial. The ongoing push for energy storage devices such as batteries and supercapacitors to store more energy and charge/discharge faster has become exponentially stronger over the past decade. In order to meet the high demands, new materials and processing techniques must be developed.
A particle extraction through the liquid-liquid interface (PELLI) technique was used with a versatile extracting molecule, Octyl Gallate (OG). It was found that OG was able to extract a variety of materials including oxides, oxyhydroxides, and pure silver. The advantage of PELLI is that it circumvents the drying stage that occurs in many electrode synthesis techniques where metal oxides are synthesized in aqueous then dried and mixed with conductive additives dispersed in organic solvent. This drying stage causes a practically irreversible agglomeration which hinders mixing with conductive additives as well as reduces the surface area of the material, limiting its electrochemical performance. Using hydroxamates such as octanohydroxamic acid and bufexamac, a novel PELLI technique was developed based on the use of OHA as an extracting agent as well as a capping agent.
In addition, a preliminary investigation was started on advanced negative electrode material for supercapacitors. FeOOH-based electrodes exhibit high capacitance but low cyclic stability. Zn2+ ions were introduced during synthesis forming a doped Zn/FeOOH electrode which showed a significant increase in cyclic stability. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/24258 |
| Date | 14 June 2019 |
| Creators | Milne, Jordan |
| Contributors | Zhitomirsky, Igor, Materials Science and Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0045 seconds