It is the purpose of this thesis to explore the feasibility of using coated-wire electrodes to measure chelating agent concentration. Chelating agents are often found in radioactive decontamination solutions because they aid in the removal of radionuclides from contaminated surfaces by increasing their solubility. However, this characteristic will also enhance the mobility of the radionuclide and thus its transport out of a waste disposal site. Coated-wire ion selective electrodes, based on a polyvinylchloride membrane using dioctylphthalate as a plasticizer and dinonylnaphthalene-sulfonic acid as a counterion, were constructed for five commonly utilized chelating agents (ethylenediaminetetracetic acid (EDTA), nitrilotriacetic acid (NTA), citric acid, oxalic acid and tartaric acid). The EDTA and NTA electrodes' calibration characteristics exhibited acceptable behavior in pure standard solutions. From data obtained while using the EDTA and NTA electrodes in a cement environment, further research needs to be done in the area of ion interference.
| Identifer | oai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/278120 |
| Date | January 1992 |
| Creators | Banks, Mark Lavoir, 1960- |
| Contributors | Wacks, Morton E. |
| Publisher | The University of Arizona. |
| Source Sets | University of Arizona |
| Language | en_US |
| Detected Language | English |
| Type | text, Thesis-Reproduction (electronic) |
| Rights | Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author. |
Page generated in 0.0021 seconds